China 400Gbps QSFP-DD Active Optical Cable Manufacturers Factory Suppliers
-
400Gbps QSFP-DD Active Optical Cable
The 400G QSFP-DD Active Optical Cable has near-zero power use. It also has low delay and low insertion loss. This 400Gbps QSFP-DD Active Optical Cable is tested in real machine environments. This...
-
155Mbps
This 155Mbps SFP Optical Transceiver works well for low-speed fiber networks. It supports both BiDi and dual-fiber types. The product SFP Optical Transceiver uses a hot-pluggable design. It runs...
-
1.25Gbps SFP
The 1.25G SFP Transceiver comes as BiDi or dual-fiber. The BiDi version saves fiber because it uses one fiber for both send and receive. This 1.25 gbps sfp works with single-mode fiber (9/125μm)....
-
100Gbps QSFP28
The 100G QSFP28 Optical Transceiver is made for high-speed fiber links. It is perfect for data centers and telecom networks. This 100Gbps QSFP28 uses the standard QSFP28 38-pin package. It...
-
800G OSFP112 and QSFP-DD
As 800G becomes the new baseline for AI training, HPC, and cloud spine-leaf fabrics, your optical interconnect must offer density, protocol flexibility, and investment protection. This series...
-
400G OSFP112 and QSFP-DD
As 400G becomes the new backbone of cloud data centers, HPC clusters, and carrier edge nodes, your optical interconnect must deliver density, flexibility, and rock‑solid reliability. This 400G...
-
622Mbps SFP
The 622Mbps SFP Module is made for STM-4/OC-12 links. It runs at 622.08 Mbps exactly. This product Module uses a hot-pluggable SFP case. It needs only +3.3V power. Typical power is below 1W. The...
-
10Gbps SFP+ Active Optical Cable
Within a data center, short connections between a Top-of-Rack (TOR) switch and servers often face a trade-off between power consumption and cabling flexibility. Our 10Gbps SFP+ Active Optical...
-
25Gbps SFP28 Active Optical Cable
The 25G SFP28 Active Optical Cable is tested in real machines. It gives you great performance and reliable quality. The minimum bend radius of this 25Gbps SFP28 Active Optical Cable is only 7.5...
-
40Gbps QSFP+ Active Optical Cable
The 40Gbps QSFP+ Active Optical Cable consumes a maximum of 1.5W at 40 Gbps (12.5 Gbps per lane). We verified this in a live test setup using a Cisco Nexus 3132Q‑V switch: after 72 hours of...
-
100Gbps QSFP28 Active Optical Cable
The 100G QSFP28 Active Optical Cable uses only 0.5W of power at its maximum. This is very low for a 100G cable. The 100Gbps QSFP28 Active Optical Cable is tested in real machines. This gives you...
-
200Gbps QSFP56 Active Optical Cable
The 200G QSFP56 Active Optical Cable is tested in real machines. It gives you top performance and reliable quality. This cable is a 200G QSFP56 DAC. It works perfectly with NVIDIA DGX Spark AI...












