China wdm mux demux Manufacturers Factory Suppliers
-
CWDM MUX DEMUX
The CWDM MUX/DEMUX Module is a special single-fiber optical transceiver. It comes in 1.25G, 2.5G, and 10G speeds. This CWDM MUX DEMUX Module is made for CWDM multiplexer and demultiplexer systems....
-
155Mbps
This 155Mbps SFP Optical Transceiver works well for low-speed fiber networks. It supports both BiDi and dual-fiber types. The product SFP Optical Transceiver uses a hot-pluggable design. It runs...
-
1.25Gbps SFP
The 1.25G SFP Transceiver comes as BiDi or dual-fiber. The BiDi version saves fiber because it uses one fiber for both send and receive. This 1.25 gbps sfp works with single-mode fiber (9/125μm)....
-
2.5Gbps SFP
The 2.5G SFP Module is made for high-speed fiber links. It works well with OC-48 and STM-16 systems. This 2.5 gbps sfp uses a hot-plug design. You can put it in or take it out without turning off...
-
10Gbps SFP+
The 10G SFP+ Transceiver series gives you two choices. You can pick the BiDi version or the dual-fiber version. The BiDi version uses one fiber for both send and receive. This saves fiber and cuts...
-
10Gbps XFP
The 10G XFP Transceiver follows the XFP MSA standard. It supports hot-plug. You do not need to turn off the device to change it. This 10Gbps XFP comes in both BiDi and dual-fiber types. The BiDi...
-
400G OSFP112 and QSFP-DD
As 400G becomes the new backbone of cloud data centers, HPC clusters, and carrier edge nodes, your optical interconnect must deliver density, flexibility, and rock‑solid reliability. This 400G...
-
200G QSFP56
As your network scales to 200G, you shouldn’t have to compromise between port density, transmission reach, or thermal budget. This product series delivers both standard QSFP56 and QSFP-DD form...
-
10Gbps SFP+ Active Optical Cable
Within a data center, short connections between a Top-of-Rack (TOR) switch and servers often face a trade-off between power consumption and cabling flexibility. Our 10Gbps SFP+ Active Optical...
-
25Gbps SFP28 Active Optical Cable
The 25G SFP28 Active Optical Cable is tested in real machines. It gives you great performance and reliable quality. The minimum bend radius of this 25Gbps SFP28 Active Optical Cable is only 7.5...
-
100Gbps QSFP28 Active Optical Cable
The 100G QSFP28 Active Optical Cable uses only 0.5W of power at its maximum. This is very low for a 100G cable. The 100Gbps QSFP28 Active Optical Cable is tested in real machines. This gives you...
-
DWDM MUX DEMUX
The DWDM MUX/DEMUX Module comes in 1.25G SFP and 10G SFP+ types. It uses a standard hot-plug package. This DWDM MUX DEMUX Module works with ITU-T 100GHz grid wavelengths. It is made for places...
May 18, 2017 · CWDM Mux/Demux supports up to 18 channels from 1270nm to 1610nm with a channel space of 20nm. While DWDM Mux/Demux uses wavelengths from 1470nm to 1625nm...
MUX and DEMUX at the heart of WDM. The key component in Wavelength Division Multiplexing (WDM), as the name suggests, is the multiplexer itself (often referred to as the “Mux”). The multiplexer...
Jul 25, 2019 · WDM system. MUX The main function of the combiner MUX is to combine multiple signal wavelengths into one fiber for transmission. At the...
FS passive CWDM mux demux (4-18 channels) greatly saves optical fiber resources for scalable OTN systems with full use of coarse wavelength division multiplexing (CWDM) tech....
MUX and DEMUX at the heart of WDM. The key component in Wavelength Division Multiplexing (WDM), as the name suggests, is the multiplexer itself (often referred to as the “Mux”). The multiplexer...
Jul 25, 2019 · WDM system. MUX The main function of the combiner MUX is to combine multiple signal wavelengths into one fiber for transmission. At the transmitting end, the N optical transmitters...












